Homemade top. Fishing tops. Techniques and tactics of use - Fishing online store Petrokanat. Products for commercial and recreational fishing, as well as ropes and cords of our own production. Top fishing technique

Fishing with tops

Versha (merega, dive) is a fishing trap tool that is very reminiscent of a mereza. The main difference: a second entrance (throat) is possible on the other side of the tackle, there are no wings, and the frame does not consist of individual hoops, but of rigidly fastened longitudinal ribs. Thus, the tackle does not need to be stretched in the water on stakes driven into the bottom, but can be cast directly from the shore, which, of course, increases the convenience of fishing.

The second advantage is that the depth at the selected location does not play a significant role, while meres and vents are applicable only at limited depths.

Design

There are many known designs of tops - on a round, triangular, or rectangular frame; cylindrical and conical; with one or two inputs; collapsible and non-collapsible...

All this abundance and diversity is described in detail in my books “Lifts, traps, casting nets” and “Crucian carp. All methods of fishing”, and I address the reader there who wants to make a catchy top with his own hands.

Here we will look at one top, the most convenient for transportation (Fig. 51), since fishing with it is no fundamentally different from fishing with tops of other designs.

There are no transverse ribs in it; the entire frame consists of several turns of a huge spring, tending to straighten out even more, but is held in place by a stretched mesh. The tackle is brought from the transport position to the working position almost instantly: it is enough to remove the latching hooks, and the top itself extends to its full length.

Fishing equipment stores now sell spring tops of all sizes (often sold under the trade name "trap net"). Often these sold tackles are equipped with additional improvements: for example, a zipper on the side, allowing you to quickly pour out the catch, or a sewn-in net bag for bait, also fastened with a zipper.

Rice. 51. Double-neck top with spring frame

Fishing technique and tactics

There are two main types of top fishing: with and without bait.

The first method is summer, and the second (without bait) is used in the spring, from the moment the ice breaks up. It is based on the fact that many fish need hard objects during spawning to rub against them, squeezing out eggs and milt. Naturally, for a good catch, you need to know perfectly well the body of water chosen for fishing: where and when its underwater inhabitants spawn. However, fish such as pike, crucian carp, and carp spawn in the shallows and give away the spawning site with noisy splashes, signaling that a fish placed here will not be left without a catch.

Finding a spawning ground, for example, for perch, is much more difficult. L.P. Sabaneev advised in such cases to create artificial spawning grounds by lowering piles of stones, piles of brushwood and felled young trees with a tied load to the bottom, and then, with the beginning of spawning, to cover this artificial spawning ground with nets and place the tops directly between the flooded trees.

Many supporters of fishing exclusively with fishing rods and spinning rods have the opinion that fishing with nets during spawning is destructive for the fish population and can very quickly turn any body of water into a fishless desert. But, since we have mentioned Sabaneev more than once, it is not superfluous to cite the classic’s opinion on this matter (he certainly cannot be classified as an apologist for predatory fishing). So, the word to L.P. Sabaneev:

“...Fishing during spawning is usually considered harmful for reproduction and unprofitable for proper fish farming, but this opinion in reality - in practice - is not always true, and, it seems to me, there is no reason to unconditionally prohibit fishing during spawning. Only destructive methods of fishing are always harmful - in spring and winter - when the fish is caught outright - adults along with small things, when a more or less significant part of the fish dies in vain, for example, when "purging" or fishing with a samoder on bare hooks, when fighting with a spear, when Finally, the fish going to the spawning site are blocked by braids and are caught entirely. Fish does not hatch or feed children, and the number of its eggs is counted in the thousands and tens of thousands, and therefore protecting fish in the spring cannot have the same meaning as protecting four-legged and feathered game. The whole point is that some of the eggs are safely swept out, and therefore fishing before spawning is more harmful than during spawning. Some fishing methods even have a positive effect on increasing the number of fish; such, for example, is fishing both with various top-shaped shells and with nets around those arranged to attract rubbing fish and more successful fishing with artificial spawning grounds, rowing, etc., in the form of piled brushwood, spruce branches, piles of stones. Wooden top-shaped gear even in itself represents bait for fish, an artificial spawning ground, and under the condition of a more or less long stay under water, a mass of young fish hatch from the eggs stuck to the walls of the top. For the same reason, fishing with catfish also cannot be called destructive if such shells do not block the mouths of rivers and the beginning of lake sources, but are arranged near the shores.

The validity of this view of the insignificance of the harm of spring fishing and the irrationality of its unconditional prohibition can be proven by the fact that the main catch of some fish is carried out precisely during spawning; In some places it is possible only during this period. Pike, for example, is caught mainly in the spring, when it spawns, and shortly thereafter.”

L.P. Sabaneev, “Fishes of Russia. Life and catching of our freshwater fish."

Well, what can I add here? In my opinion, a completely comprehensive and reasoned opinion. However, let's return to fishing with tops.

Fishing with tops on small forest rivers and streams (especially those flowing into reservoirs rich in fish) has its own characteristics. The flood on such rivers is very violent, but the water subsides quickly, and fish cannot find banks covered with vegetation and flooded with water for spawning. Very often, roach and pike spawn along washed-out steep banks, on the roots of coastal bushes and trees hanging into the water. Such gullies, small underwater caves, are very convenient for installing a top - the tackle is not just close to the shore, but actually under him, and it is impossible to detect it by chance, for example, by hooking a fishing rod.

The second method of spring fishing is that the top does not lure fish as a convenient object for freeing eggs and milk, but stands with its open throat in the way of fish hurrying to the spawning site, or having spawned and returning to their usual habitat.

Since the top does not have wings that concentrate the fish against the mouth of the trap, you have to choose places where the fish naturally concentrate.

For example, they are very successful at fishing with tops where a stream or small river sharply narrows and speeds up, going around some natural or artificial obstacle: a large boulder, a blockage of trees that have fallen into the water with all sorts of debris nailed to them, etc. So that I don’t carried away by the current, the front hoop of the top is tied in two places to a stake driven into the bottom.

Old, long-destroyed hydraulic structures - dams and sluices on small rivers are also very promising for fishing: holes in them and old spillways, through which water barely flows in summer, during spring floods produce jets that can clog and squeeze fish into the throat of the tackle. It is much easier, of course, not to wait for favors from nature and to build an obstacle with your own hands along the course of the fish: the so-called zakol (also known as a zayazok, a tie, etc.), most often a kind of fence on stakes driven into the bottom, with small spaces for tops and similar gear. But the fishing rules of almost all constituent entities of the Russian Federation prohibit the installation permanent obstacles preventing fish from reaching spawning grounds. Therefore, fishermen who do not want to come into conflict with the law have to look for places convenient for fishing that have arisen without their participation.

Fishing for tops on small streams flowing into a river or lake can be very successful. Looking at a thin stream of water in the summer, it is difficult to imagine that in the spring you can catch a meter-long pike here, but the top, exposed to a stream swollen from the spring flood, will never be left without a catch. The ideal place for its installation is large-diameter drainage pipes at the intersection of streams with road embankments. By clearing the pipe of debris in advance and measuring its diameter, specially making a top in accordance with it, you can achieve very large catches of roach and pike. You can also choose a suitable size from purchased gear, and if the diameter of the pipe is not much larger than the diameter of the top, then the gaps should be filled with spruce branches, bunches of cut reeds or other available material.

In addition, the top hidden in the pipe is reliably hidden from the eyes of those who like to profit from someone else’s catch. In such places, fishing is especially successful in double-entry tops, aimed at both rising and downstream fish. If two, three or more pipes pass under the embankment, then several single-entry points can be used, oriented some of them along the flow, others against it.

Summer fishing with tops, as already mentioned, is mostly carried out using a variety of baits.

For river fishing, tops are chosen with the smallest possible mesh (so that even the top can’t slip through), and a so-called “valve” is placed on the entrance throat. The fact is that pike and other predatory river fish (burbot, perch, etc.) are not interested in plant bait, but go inside the gear, attracted by small carp fish floating in the top: roach, verkhovka, gudgeon.

If fishing is done on the current, then bread bait is of little use, since it is quickly washed out of the tackle. If the fish is not caught in the current, but the angler does not have the opportunity to frequently inspect the gear (at least once every two days), then it is also not recommended to use bread for bait - it sours and scares away the fish. In both cases, cakes are used for bait; in their absence, pieces of sponge or foam rubber soaked in oil are used. Many anglers believe that predators are attracted to aluminum foil crumpled into fist-sized balls and placed on top. This opinion has not been confirmed by anything or anyone, but it has not been refuted either. In any case, there will be no harm from the foil placed on top.

In fact, the question of what exactly attracts fish to the top during summer river fishing requires additional research: sometimes good catches happen without any bait at all. I believe that the tackle itself, even without any bait, lures peaceful fish seeking refuge from predators. Otherwise, it is difficult to explain how tiny perch, which are not interested in plant baits and, due to their small size, are unable to hunt for other fish, as well as ruffs, get into the tops. The pikes, in turn, try to get to their victims hiding in the top - and also find themselves in a trap.

There is no point in placing tops in clean, open areas of rivers and lakes, even with bait. The best places for fishing are dense thickets of aquatic vegetation, washed-out banks with roots hanging into the water, willow bushes growing directly from the water, etc. In general, the top fish should lie in wait for its prey in those shelters where daytime fish go to spend the night, and night-time fish - for the day, where they hide from predators and bad weather.

Fish that love space and fast currents (asps, salmon, etc.) are caught in the tops extremely rarely. The catches during river fishing are usually dominated by tench, roach, perch, pike, burbot, silver bream, white bream, and in some places ide and rudd (in some places these last two fish for some reason do not come to the top at all).

This text is an introductory fragment. From the book Oh, the Hunt! author Alekseev Sergey Trofimovich

Fishing Hunting as a job Since ancient times, hunting has always been divided into two types - professional (commercial) and amateur (sports). The first exists to this day as a way of subsistence, income and, as previously mentioned, is not economically profitable for the hunter himself, because

From the book Fishing with Mugs author Bernstein Semyon Markovich

Catching live bait The occasional absence of live bait at the base or its poor quality leads to the disruption of a trip to the reservoir. The fisherman must learn to catch live bait, having with him a net - a lift made of thin thread, painted faded green or brown. Mesh size - 1.5 x 1.5 m.

From the book Sports Fishing Practice author Matveev Mikhail Mikhailovich

Pike fishing The main prey of the circle fisher when fishing is pike (Fig. 25). The technique developed and tested in practice for catching this predator can be considered typical for fishing with circles. Anyone who knows how to properly catch pike with mugs has basically mastered this method.

From the book Merezhi, top, venteri author Shaganov Anton

Fly fishing Fly fishing (fly fishing) is one of the oldest methods of catching mounted fish using live insects or their imitation. This fishing method is highly sporting. We can say that fly fishing (as well as spinning) is to some extent akin to tourism, since

From the book Carp and carp. All fishing methods author Shaganov Anton

Fishing with circles The growing popularity of fishing with circles is explained not so much by the high catchability of this method, but by the high activity: the fisherman is on the boat all the time, continuously rowing, and this brings real pleasure. Circle (circle,

From the book Fishing for Carp Fish author Shaganov Anton

Fishing with a spinning rod Catching predatory fish with a spinning rod is excitingly interesting and truly sporting: it gives a comprehensive load to the fisherman’s muscular system, develops endurance, eye, strength and dexterity. The spinning rod consists of a rod with guide rings for the line

From the book Pike. All fishing methods author Shaganov Anton

Track fishing Track fishing is an old Russian way of catching large predatory fish. In the process of track fishing, the angler is in continuous motion, rhythmically working with oars, and thus receives a uniform, non-burdensome physical load on the muscular system of the arms,

From the book Karas. All fishing methods author Shaganov Anton

Trolling fishing Trolling is one of the methods of vertical fishing for predatory fish, used in grassy, ​​heavily snag areas inaccessible for fishing with a spinning rod or track (Fig. 65, a). The simplest tackle for trolling fishing is a spinning rod

From the book Winter Priest author Akimov Alexander Georgievich

Winter fishing with tops During winter fishing, the tops are installed vertically under the ice holes, tying them to poles driven into the bottom. No bait is used; the bait is fresh air entering the water from the ice hole. Rice. 15. Winter fishing vertically

From the author's book

Fishing “with a hair” Fishing “with a hair” or “with a hair rig” consists of putting the bait on a hook and connecting it with a short and thin fishing line (this is what is called a “hair”). The fish pulls the bait into its mouth without any suspicion - even those cautious and

From the author's book

Spring fishing Asp spawn in different places at different times, in temperate latitudes in the second half of April or early May, when the spring flood subsides and the water level in the rivers drops almost to the summer level. Females spawn on fast-flowing rocky rifts

From the author's book

Fishing with tops A top is a fishing trap tool that is very reminiscent of a mereza. The main difference: a second entrance (throat) is possible on the other side of the tackle, there are no wings, and the frame does not consist of individual hoops, but of rigidly fastened longitudinal ribs. So

From the author's book

Fishing with tops A top (merega, diving) is a fishing trap tool that is very reminiscent of a mereza. The main difference: a second entrance (throat) is possible on the other side of the tackle, there are no wings, and the frame does not consist of individual hoops, but of rigidly fastened longitudinal

From the author's book

Fishing with a nonsense Oddly enough, our ancestors began to use a nonsense as a fishing tool a very long time ago, long before they thought of knitting a net from threads or twines. Ethnographers who studied the life of the indigenous peoples of Altai described gear that was clearly

From the author's book

Catching with a catfish If in Russia fishing with catfish and similar traps gradually declined in the 20th century, surviving only in remote corners, then in neighboring Finland it developed and is still developing successfully. Obviously, it’s not only and not so much the zealousness of our

From the author's book

Pike fishing Undoubtedly, the best bite of this predator occurs on the first ice and continues with a gradual decline depending on weather conditions until the onset of the new year. In mild, warm winters, when days with light frost are interspersed with short

Homemade fish traps with your own hands This was done in childhood by everyone who had a river or lake nearby. Because this invention appeared before the fishing rod. Man made primitive tops from twigs back in the Stone Age, as archaeologists say.

All fishing devices have one principle: if it swims in, it can’t find its way back out. The calculation for her poor eyesight is 100% justified. Finding no way out, the fish may panic, hit the walls or go into hibernation and freeze.

From a plastic bottle

Take any large water bottle, beer or lemonade. Wash thoroughly to avoid any odor. All bottles or even "bottles" (i.e. large containers) have a neck that needs to be cut off at one-third of the length of the bottle. You will get a fairly large funnel.

For a vessel with a volume of more than 5 liters, the plastic is quite thick, the neck is more than 2 cm wide. If you get serious about making such a trap, you will need a fishing line and an awl. Using an awl, pierce holes along the edge of the funnel and the vessel and sew the funnel turned inward with its neck to the larger part. The result will be an entrance that will lead the victim inside.

It's harder to find from the inside. What if he made a “tunnel” out of thin plastic?, does not reach the bottom by 8-10 cm (insert the plastic rolled into a tube into the neck and secure with a couple of stitches of fishing line), the fish will never find a way out.

Several holes need to be made in the housing for free flow of water and thread a nylon cord, using which you can remove the trap from the water. You can put pebbles – weights and bait – inside.

The larger the trap, the more prey it will catch. Nimble minnows, roach and perches are especially likely to fall into such traps.

The first ones will be lured by delicious porridge, and perches will rush inside for bloodworms, finely chopped worms or meat. And small change can be used as “bait” – live bait.

Stationary

Larger fish traps require certain equipment. A very promising development is a box made of mesh. To build such a large structure, you will need a frame made of wooden or plastic slats. You can take two children's plastic hoops and use them to make a round “box”.

Straight water pipes made of metal-plastic or PVC will hold the walls (or the frame of the entire box). You need to think about the fastenings so that the box can be disassembled. For the walls you will need a fine plastic mesh. Garden nets made of green PVC with a mesh of 1 cm or cheap fine-mesh Chinese nylon nets are suitable.

The hardest thing to make is the entrances in the form of a funnel and attach to the opposite walls of the box, but for this you can use a durable plastic mesh that holds its shape well. The design will take up little space during transportation, and at the bottom it will attract not the smallest fish.

She will be especially attracted by the “aquarium” inside- a jar with fry, which will attract all the perches from the area with its knocking sound. These boxes make excellent winter fish traps.

Unusual traps

If you decide to catch a few small fish on your fish while on a hike, but there are no suitable bottles, but you have a saucepan and gauze (or thin cloth) - don’t despair. All it takes is the courage to enter the water with a new trap. Place gauze over the pan and secure it so that it does not come off with water.

Make a hole in the center with a diameter of 4-5cm(cut crosswise with a knife) and place bread and small grasshoppers inside. Go to a shallow riffle and carefully bury the “structure” to the very top. In half an hour, a crowd of minnows will be scurrying around in the pan.

In the same way, small fish (necessary for baiting a large predator - pike or lenka) will be attracted by an ordinary glass jar with a window cut into the plastic lid.

Pour a handful of bread crumbs into it, put it in warm shallow water - and watch how curious and always hungry fish swim into the “trap” one after another.

You can also make a trap for catching fish directly on a pond made of wood sticks. Watch this video for more details.

Flat traps - screens

More than once I have seen these strange structures made of thick wire (rebar) and nets. Two reinforcements hold the network in the form of a “wall”. A thick fishing line capable of holding several kilograms is tied with a bridle at two corners.

There is a feeder tied in the center- a box through small holes in which complementary foods are slowly washed out. This structure descends to a depth of one to two meters. The sizes of network cells can be any.

There are even screens with several walls. The outer wall lets fish in, and the small “gill” net delays the movement, it tries to turn around and gets entangled in large cells.

This projectile cannot be called catchy, but it will catch fish.

Purchased

On sale you can find all the described fishing devices, except for the plastic bottle. "Tops", boxes and "muzzles" They are sold in specialized fishing tackle stores at very reasonable prices.

Made from stainless steel wire and a durable nylon net, traps can provide fish and crayfish, which also “come in and don’t come out” even on not the best days for fishing.

From straight branches of bushes and plants growing near a pond, you can make the simplest homemade tops. First, the frame of the top is assembled from the prepared branches, consisting of 5 - 10 circles and 3 - 4 longitudinal poles. Circles are tied to poles using wire, fishing line, strips of fabric, bast.

The resulting frame of the top is intertwined with thinner branches in such a way that the distance between them, depending on the size of the fish, does not exceed 1-3 cm. The entrance to the top is made in the shape of a funnel with a narrow opening-neck. The result is a kind of trap, repeating the shape of a sippy inkwell. The top is suspended from the inside on small leashes. The top is checked several times a day, the caught fish is pulled out through the untied blind end (Fig. 1).

There are several ways to make a funnel entrance to the top. Flexible branches of the longitudinal braid can be bent inward (Fig. 2), heated over a fire and tied to the entrance ring. Fragile branches that cannot be bent can be broken, but so that they are held at least on the bark, bent and again tied to the ring that forms the entrance of the top (Fig. 3). Finally, you can use thin poles with side branches equally cut off at the butt part, which, converging in the center, form a funnel (Fig. 4).

Making a triangular or oval top.

In the case when, when constructing a top, it is not possible to connect the rings that form its frame, you can make a simplified version of the top of an unconventional triangular or oval shape. To do this, you need to find and cut several poles (slingshots) of the same thickness and type, forked at the end. Then connect the diverging ends of the “slingshots” and tie longitudinal poles to the resulting elements of the transverse frame, which are then intertwined with thin branches (Fig. 5).

Homemade tops from the trunk of a hollow tree.

There is another top design made from the trunk of a hollow tree. Having found such a hollow trunk, you need to saw off a 1-2-meter log from it. The result is a hollow cylinder. One side of it must be braided with branches or covered with a piece of polyethylene or fabric. On the other side, at an angle of 30 - 60 degrees, drill or burn through holes into which to drive strong branches until the required size of the funnel is formed (Fig. 6).

Homemade tops from cans.

You can make a kind of funnel top from a 2-3 liter glass jar. To do this, you need to roll up a bag from a piece of leather, thick polyethylene, or birch bark, leaving a small hole in its lower part, insert it into the neck of the jar and secure it. The jar with the bait placed inside is placed on the river bottom with its bottom against the current and tied to a peg driven into the ground. The fish that notices the bait swims inside and finds itself in a trap (Fig. 7). When catching small fish, you can do without a funnel by stretching polyethylene or a piece of leather with a small hole in the middle over the neck of the jar and securing it at the edges with an elastic band or rope. It’s even more convenient to put a nylon lid on the jar and cut a hole in it. Such a flat “funnel” is also capable of holding fish caught inside.

Homemade top from a plastic bottle.

The tops are made using the same principle. To do this, its neck is cut off, which, upside down, is tightly stuck into the remaining “glass” and secured with wire, thread or thickly smeared resin (Fig. 8).

Catching minnows using bowls or jars.

Minnows can be caught using bowls or flat, 3-7 cm high, salted herring jars. The top of the bowl is covered with a cloth in which a hole the size of a walnut is cut. In this case, the hole should be located in the middle of the bowl. The ends of the fabric are secured to the edge of the bowl. A piece of bread or something else is thrown inside. The tackle is taken out to the riffle of the river and buried in the ground so that its top is at the bottom level. In just half an hour, up to two dozen minnows can be crammed into a bowl. You can catch minnows in much the same way using a bucket (Fig. 9). Fry can be caught with improvised nets made from parts of clothing or pieces of fabric.

Homemade nets for catching fish while surviving in extreme conditions.

In addition to the described tops and, ancient fishermen successfully used primitive gill nets woven from thin strips of bast taken from tree trunks. Gilled - because the fish, when caught in the net, became entangled in their gills. Clay balls or stones tied to the bottom of the net were used as sinkers. The net was installed across the current or along aquatic vegetation in places where fish accumulated. I’m not sure that modern “Robinsons” are capable of weaving a net from bast, but from more modern materials - why not?

You just need to have plenty of rope and patience. The required amount of rope can be obtained by unraveling a nylon rope, a towing end, or, using climbers' terminology, the main rope into separate threads. Thick nylon ropes are almost always woven from many individual strands, quite suitable for weaving nets. Methods of weaving nets are shown in Fig. 10, 11. The mesh size for nets is usually selected depending on what kind of fish the fisherman intends to catch. Most often it does not exceed 2-5 cm.

Fishing with nets has its own characteristics, which are best learned about in advance, and preferably not theoretically. On large bodies of water, the net is easiest to use as a drag net. To do this, it is necessary to go deeper into the water and stretch the net, move along the shore, gradually approaching it and bringing the ends of the tackle forward. Moreover, the higher the speed of the fishermen at the last stage of fishing - pulling the net ashore - and the more noise they make, driving the fish trying to escape back into the trap, the greater the catch promises to be.

Tackle for passive fishing - a fishing top - can be made with your own hands from any suitable material. You can quickly make it if you have a ready-made container for the case. When surviving in extreme conditions, it makes sense to spend a little time and make a trap using traditional technology.

The muzzle, venter, or top is a trap with a funnel-shaped entrance. A fish interested in the bait swims through a gradually narrowing tunnel and gets inside the body, where the bait lies. When trying to leave the container, the fish is no longer able to find the hole through which it entered.

When removing the tackle from the water, the fisherman can get the catch through another hole, which remains closed while the tackle is working. If the homemade top is made from a ready-made container (can, plastic bottle), then it is advisable to provide a funnel attachment that will make it easy to remove it when taking out the catch.

How to do it yourself?

Traditionally, willow or other thin and flexible branches were used to make the top. To weave a funnel, a ring with a diameter of 5-7 cm was made, on which a vine for the base was secured. The base was braided with thinner strands, and it was given the shape of a funnel, expanding from the ring. Having made an entrance about 20-25 cm long, they began to weave the expanded upper part of the muzzle, spreading the warp rods to the sides and gradually bending them down.

The entrance funnel then ends up inside the wicker vessel, which again begins to narrow towards the top. In a simple method, the ends of the unbraided rods can be tied with a strip of strong bark or rope, closing the hole. In a more complex version, a ring of larger diameter was placed on this hole, and a lid made from a circle of thick bark or woven from a vine was attached to it. Similar designs are still woven in villages using wire.

From a plastic bottle

At a picnic by a pond, the muzzle can be easily made from scrap material using a water or beer container. The amount of fish that can be caught in 1 cast and the size of the crucian carp depend on its volume.

Cut off the neck of the bottle and part of the body at about 1/3 of its height. If necessary, you can also remove the screw part under the cover to slightly enlarge the hole. In 5-liter cylinders this can no longer be done.

Turn the cut part of the container over and place the neck inside the container. Connect the edges of the parts with wire. The fastening must be detachable so that the neck can be removed and the fish can be taken out of the trap.

From the air filter

You will need a large filter from a truck (most often they take an air filter from KAMAZ). Remove all filling from the mesh body. A cylindrical metal grid is well suited for quickly making a top with your own hands:

  • cut out and fasten at one end a dense, blind cover made of tin or plastic, plywood, etc.;
  • make a funnel for entering the trap from flexible sheet material;
  • strengthen the funnel with the narrow end inside the mesh body;
  • tie a rope.

With metal frame

Frame products will require the use of thick steel wire and material to cover the frame. Most often, nylon or plastic mesh with a fine mesh is used as covering. You can make a top on a frame with 1 or 2 funnel-shaped entrances:

  1. Roll several rings of equal size from steel wire. Their diameter is chosen arbitrarily, but to catch large fish it is better to make the muzzle at least 30 cm wide. The length of the product depends on the number of rings; you can make 3-5 frame rings.
  2. Make 1-2 small rings for the entrances from the same wire. Their diameter can vary between 5-10 cm, depending on the size of the desired prey.
  3. Wrap the net around a large ring, leaving a free edge of about 20 cm in length. Tie the net to the ring with a slight overlap at the junction of the side edges. After 20-30 cm, also tie another 1-3 rings, and secure the last one at a distance of 20 cm from the edge of the mesh. You should get a soft cylinder with a loose mesh on the end sides.
  4. Shape the edges of the net into a cone shape, laying several folds, and attach small rings to the edges.
  5. Bend the tapered ends inside the body. To prevent the fish from swimming through the trap in a straight line, the entrances are shifted to the opposite sides of the vent, secured with leashes made of wire or fishing line.

If they make a top with 1 entrance, then the other end can be tied tightly so that the fish does not escape through it. The same principle applies to collecting crayfish, but making one side flat so that it fits better on the ground. The frame wire can be replaced with a plastic tube rolled into circles of the desired diameter.

Made from metal mesh

Another way to make a fishing top is to use a rigid galvanized mesh. From it you need to cut a rectangle, the width of which will be equal to the length of the future product. The length of the workpiece is selected so that it can be rolled into a cylinder with a diameter of about 30 cm.

Roll up the body of the top and connect the side seam using wire. Cut out a funnel from the same mesh, roll it up and secure it to the end of the mesh cylinder. The other end of the body is equipped with a lid that can be opened to remove the catch. Attach the rope.

Top fishing methods

Fishing for top fish can be done with or without bait. Fish can be attracted by the smell of food or the structure itself (during the spawning period). But for successful fishing you need to know how and when it is better to catch crayfish or crucian carp.

With bait

The feeding instinct forces the fish to dig into the most inconvenient places if it expects to get to the food. Lures that many breeds find attractive are placed in the muzzle: bread or dough flavored with vegetable oil, and sometimes with odorous substances (anise drops, perfume, valerian tincture, etc.). Potato peels, egg shells, dough are suitable. In addition to crucian carp, minnows and minnows are used for such bait.

They are caught with bait in the summer, throwing their muzzles into the shady corners of the reservoir. It is advisable to drown the top where the strip of coastal underwater vegetation begins. If it is possible to observe the reservoir during the morning and evening feeding of the fish, then the fisherman will be able to determine a more accurate location for casting the tackle: the tip is placed where the fish were playing.

You need to check the tackle several times a day, removing the caught prey from it.

Without using bait

Sometimes catching tops is possible even without using bait. The method without bait is used in the spring, when the fish goes to spawn and may find that such a convenient place is suitable for spawning. Different breeds of fish that prefer to spawn in thickets of plants can get into the snout at this time. The trap is placed where a concentration of crucian carp, bream, and ide is found. The spawning site is easy to determine by splashes of water.

On rapids, in small streams, venters are placed in a narrowing channel. Passing along the river, the fish is forced inside and cannot get out of the trap. With a little practice, you can determine the best way to place the top on the river: on the current or closer to the spawning grounds.

Disadvantages of top

Homemade fish traps (fish traps) are quite bulky structures. The folding version can only be made from wire rings or spirals covered with mesh, but other methods do not have this property.

The disadvantages include the difficulty of catching large fish.

The top is a fishing gear of the straining type, installed at the bottom of the reservoir. In fishing practice, there are several types and methods of fishing with tops:

  • with and without bait;
  • in summer and spring during spawning.

The first method is very simple: the top is installed on the bottom between stones or in thick algae. You can put bait inside the top. The fish follows the smell of bait and enters the hole in the chamber. The entrance hole is made at a special angle, so the likelihood of it coming back is very small.

The second is based on the fact that many fish need additional accumulation during spawning and look for hard objects to rub against them, squeezing out eggs and milk.

To achieve a good result, you need to know the body of water chosen for fishing, the behavior and habits of the fished objects. For example, fish such as pike, crucian carp, and bream spawn in shallow water and give themselves away with noisy splashes. Finding the spawning grounds of tench, lamprey and perch is much more difficult.

Fishing classic Leonid Sabaneev advised in such cases to create artificial spawning grounds from a pile of stones or branches and after that install a top in it.

Many supporters of sport fishing have the opinion that fishing with nets during spawning is detrimental to fish reproduction. On this issue, you can quote an excerpt from the book by L.P. Sabaneev “Fishes of Russia. Life and fishing of our freshwater fish”: “...Fishing during spawning is usually considered harmful for reproduction, but this opinion in reality - in practice - is not always true, and I think that there is no complete reason to unconditionally prohibit fishing during spawning. Only destructive fishing methods are always harmful - in spring and winter - when the fish are caught completely - adults along with small things and in cases where a significant part of the fish die simply in vain. Fish does not hatch children, does not feed them, the number of eggs is considered to be in the thousands and tens of thousands, and therefore protecting fish in the spring cannot have the same meaning as protecting four-legged and feathered game. The whole point is that some of the eggs are safely swept out, and therefore fishing before spawning is more harmful than after. Some fishing methods even have a positive effect on increasing the number of fish. So, for example, fishing with various top-shaped gear. Wooden tops themselves even act as bait for fish and create an artificial spawning ground, and a mass of young fish hatch from the eggs stuck to the walls of the top.”

What else can I add here? This is a completely comprehensive and reasoned opinion. However, let's get back to fishing with tops.

Fishing with tops on small rivers and streams has its own characteristics. The flood there is very rough, but the water subsides quickly, and it is very difficult for fish to find shores suitable for spawning, covered with vegetation and flooded with water. Very often, roach and pike spawn along washed-out steep banks, on the roots of trees and bushes hanging into the water. Such places are very convenient for installing the top - the tackle is not located close to the shore, but actually under it, and it is almost impossible to discover it by accident.

Another method of fishing in the spring is that the top does not attract fish as a convenient object for squeezing out eggs and milk, but stands in an open state in the mud of the fish migration.

The fish are very successfully caught where the river or stream narrows sharply. It is necessary to ensure that the top is not carried away by the current; to do this, the top is tied to a tree or to a stake driven into the bottom.

Double-entry tops are especially successful in catching. They can be aimed at both rising and falling fish.

Fishing with tops in the summer is usually carried out using a variety of baits.

If you choose a top with a minimum mesh mesh, then the small fish caught inside serves as bait for predators such as burbot, perch and pike. If you fish in a fast current, the bread bait is ineffective because it is quickly washed out by water. In stagnant water and low currents, if the top is checked less than once every two days, the bread sours and, on the contrary, scares away the fish. The most traditional and popular is the use of cake; in its absence, pieces of foam rubber soaked in oil.

In open and clean places, placing tops, even with bait, is not effective. The best places are dense water thickets, washed-out banks, narrow places in rivers and streams, and passages between boulders. All types of tops and hems can be purchased in our

gastroguru 2017