Readers' Choice
Popular articles
Fishing has long ceased to be a simple entertainment and hobby; for many men, this is the time when they can relax, take a break from problems and focus on a complex but interesting process, and homemade fishing tools for summer fishing will help with this. Therefore, there are a great many ways to fish, as well as varieties of fishing tackle, everyone selects them to suit their own needs, and some even create several home-made fishing products for summer fishing. This could be a simple hand-made wooden stick with fishing line and worms, or a high-tech novelty, complemented by your own spinners and modern baits for predatory fish.
And it doesn’t matter how you prefer to fish: the old fashioned way or using modern gadgets - a homemade fishing device for summer fishing will help you adjust a ready-made device to your requirements. Since ancient times, fishermen had to make everything themselves, and even in the modern world, many experienced people prefer to rely on equipment they created themselves, which will never fail, unlike purchased ones.
This practice is common because factory production is set up to create crafts that will suit as many situations as possible, and with rare exceptions they do not take into account many details.
So, what can you do yourself to make summer fishing easier if you are new to this activity?
No matter how developed your imagination is and no matter how varied your DIY fishing gear may look, they can still be classified into one of 8 main types:
With rare exceptions, almost all fishing homemade products fall under this type, and if you miss fishing rods and boats that are difficult to implement, then you can make most of the other gear yourself.
A very common and indispensable equipment when hunting predatory fish:
It is most convenient to use them in conjunction with a spinning rod, and these are the simplest fishing homemade products that anyone can do. In order to make homemade spinners, it is enough to make “petals”, which are cut out of metal according to pre-marked templates. After that, several holes are drilled in such a part, and it itself is bent at a right angle so that the first and second holes are on the same straight line. Next, this entire structure is secured to the main fishing line in a simple way.
You can experiment with templates from the Internet or create your own, but to make the work easier, it is better to use ductile metals that are not subject to rapid oxidation.
It is impossible to imagine modern fishing without a float; it has become a kind of symbol of fishing and is displayed on signs in specialized stores.
Most beginners think that this gear has a couple of trivial functions:In reality, everything is completely different, and, depending on modifications, this simple equipment can perform dozens of different functions. If we talk about the design, then it is a simple “stick” attached to a fishing line, the lower part of which is in the water, and the upper part is above it and should record the movements of the hook. This base can be supplemented in a variety of ways, as evidenced by the many varieties of floats, and each fits its own individual situation, performing certain tasks.
Creating a float at home is accessible to anyone, because its main characteristic is its density is lower than that of water. Therefore, for the base, you can use any container with air that will allow the homemade product to float, so that it does not turn over from side to side, you need to install a keel or weight on one side, in simple terms. Attach a signal antenna on top, which should be drawn out in advance. Next, all that remains is to find a metal ring or rubber band that will allow you to attach it all to the fishing line and your homemade float is ready!
Experiment with shapes and materials, but always take into account the Archimedean force, which must exceed the attraction of the hook with bait, and you can equalize it thanks to weights.
Here on one page you can find fishing crafts made from simple materials. The production and main characteristics are shown in the video; catchability is tested in reservoir conditions. There is no doubt that the catch will increase significantly if you apply these little tricks to your fishing practice.
We advise you to take a closer look at the invention of Sergei Makarov’s homemade fishing craft. This is a lollipop stick. In practice it turned out to be an excellent extractor. The meaning of manufacturing lies in one manipulation. At the beginning of the tube we make a small slit with a hacksaw for metal. Extractor is almost ready. What is it for? When fishing, especially in the spring, the fish behave actively. I use small hooks and get some problems. The hook goes very deep. You have to do manipulations with the fish that neither you nor the fish enjoy. And this little homemade tool helps out. The line starts to cut. It turns slightly so that there is no reverse motion. It is buried, put on the shank of the hook, and pushed out. This way the hook can be easily released. In another article - a store option.
Recommendation from personal experience. The guard used by fisherman Igor Kazantsev is made of a spring. For herself, she chooses bright colors, such as yellow or green. Especially in cloudy weather it is good when the color is yellow. It is noticeable on the hole. Less irritating to the retina. We use ten fishing line. A few words about the jig that is in the review. This is a classic executed ant. This fishing homemade product belongs to the category of universal attachments. You can fish with it either looking at it or without it. The jig configuration must be correctly constructed. For her to play. There are some that look like ants. Especially in its shape. But there is one note: the hole into which the fishing line goes is made from the very top of the ant. This gives the action needed for this class of jig. Why can this be a baitless tackle? Putting a yellow bead or another cambric of the same color on it, for perch, which often bites on a reelless jig, this combination is an irritant. He can't resist taking the jig.
Let's imagine such a situation. You are on a boat. Depth approximately 1.5 meters. There will be grass all around, as usual, with windows and corridors. You have the full feeling that a perch is grazing in this grass. This is exactly the situation the fisherman found himself in. I was right in my premonitions, there was a perch there, but it was almost impossible to catch with a spinning rod. There are four hooks for five casts. It is impossible to drag a spinner through the grass. He returned home and invented a new tackle. When I appeared in these lands for the second time, I caught 4.7 kg of perch in these lands. Let's try to collect it.
You will see what you need for this as you make it by hand. This operation is simple and everyone knows it. After casting, the workpiece is processed with a hammer and file and acquires a marketable appearance. Of course, you can buy a jig head, but in this case where to put unnecessary hooks and, most importantly, free time. Now we cut out the fish from the back and give it the appearance of a fry. The fish glued to the hook can be coated with nail polish. If you want to make the tackle durable, coat it with epoxy. The final touch is attaching the spinner. A small yellow petal along with a supporting bead is attached to the fishing line. We pierce the tackle and tie the fishing line to the hook. Look at the video to see how the finished perch tackle behaves in the water.
I decided to start making a balancer at home as an experiment. I took the simplest route. The basis for production was the classic version of a winter spinner for catching perch. On this base I made something similar, outwardly somewhat different from traditional balancers used for fishing. Judging by the tests carried out, there was an effect. The fish always has the final say in determining the quality of the bait. During testing, I encountered a combination of weather conditions that were unsuitable for optimal fishing. As a result, the bite is very sluggish. But this bait brought several fish. There is hope that he will bring more.
It is based on an ordinary perch spoon. I did not fill it with solder very much in order to achieve the gliding properties of the lower part of the homemade fishing catch. I firmly placed hooks on both sides. I did not install a tail, as is used in most balancers. Made it easier. A rigid propylene brush that gives the ability to plan. Added some red wool. Fasteners: I made a bandage and coated it with glue, making a movable mount. Options for sizes and some details are possible. The most interesting thing is that the fisherman came to the conclusion that almost all spinners for vertical fishing become horizontal with a small operation. The only caveat: round-shaped spoons are not suitable for conversion into horizontal ones. They have a certain mass and weakly expressed properties for planning. This is necessary for horizontal movement of the spoon. We must first find the center of gravity. Make a mark. They let me make a through hole. The master went a little further to secure the loop. In this model, place a suspended double in place of the fishing line attachment in the traditional spinner shape. It acts as a tail.
What should tired spinners do when they are not very lucky? There is a lifesaver. Fishermen have been using this for many years. Regular fishing takes place in swampy areas. That is, grass, reeds. Rudd and other fish that are present in such reservoirs are caught. This is a rather primitive fisherman's homemade product. Any jig in color and shape can be used. The most important thing is that there is a long fore-end. There is a second manufacturing option. It is advisable that the float does not have an antenna. Fishing takes place directly in the thick of the grass. When fishing for fish, the antenna very often catches the grass. Sometimes the tackle is even lost. The float is preferably dim. Fishing occurs at a depth of 20-40 cm.
Where is the best place to catch rudd? On the bays there is a wall of reeds and clean water closely adjacent to it. Depth one or more meters. She doesn't change. It is advisable to throw the jig as tightly as possible to the reed wall. The bites are such that the float does not flood, since the fish is riding. It is better to use maggots as bait. It sits more securely on the hook, but the worm constantly breaks off.
For many fans, fishing is not even a hobby, but a way of life to which they are ready and even devote all their free time.
And therefore, very often, avid fishermen have to invent and make various baits, spoons, tackles and much more themselves.
It is often a pity to part with a vibrating tail that has already served its purpose. Or would like to add some element to it that you think is quite necessary. It doesn’t matter, you can make a new silicone bait at home.
Manufacturing:
Very often when fishing, especially fly fishing or lure fishing, there is a need to quickly change the nozzle. For this purpose, a specially shaped mini-clasp was invented. It is quite simple and easy to make at home.
Manufacturing:
If you prefer to fish from a boat, then you will definitely be intrigued by this very simple and inexpensive fish feeder. It will serve as an excellent replacement for casting bait by hand, especially if fishing is in the current.
To make it you will need:
A piece of pipe about 30 cm long is fitted with plugs on both sides, one firmly and tightly, the other like a window in a house on a hinge.
We drill holes along the entire surface of the feeder.
A rope is connected to the opening lid, and a lock is attached to it from the inside. Weights are installed outside the pipe near the cover.
The feeder, pre-filled with bait, is carefully lowered into the selected fishing spot with the lid down due to the weights attached to it, and with a slight tug of the rope the unwanted spot is emptied. The whole place is baited and you can fish.
Store-bought wobblers are certainly not bad: very colorful, streamlined, completely imitating a small fish and its movements in the water, but they have one big drawback - the high price.
Therefore, many people prefer to make them themselves at home, especially since the process itself does not require special equipment and is quite exciting in itself.
Making wobblers:
Making a spinner with your own hands is not at all difficult with some skill. An example is a spinner.
For this you will need:
We cut out the shape of the petal itself from cardboard and transfer it to metal. Carefully cut along the contour and remove burrs along the edges with a file.
We drill two holes along the edges and process them with a needle file.
We bend the places with holes at an angle of 90° relative to the petal.
We make an axle out of wire with a ring and a loop at one end, where we attach the tee hook.
We thread a petal through the other end, then a bead, and at the end we make a loop for the fishing line at a distance so that the lead sinker does not interfere with the free rotation of the petal.
The spoon is loaded experimentally on a reservoir by attaching weights to the niche between the petal and the tee. And the final touch is the coloring of the spinner.
When fishing, the problem of using live bait for bait often arises. Catching it usually involves wasting time. In hot weather, baitfish quickly become lethargic in a bucket of water and die.
A very simple device made from two plastic bottles will help you solve this problem:
That's it, the trap is ready. We throw bread crumbs inside and throw a trap near the shore. The fry, having swam for food, can no longer get out of there on their own.
All that remains, when you need live bait, is to pull the trap out of the water and, by removing the plug at the bottom, get fresh and vigorous live bait.
In winter, live bait is often used to catch predators.
An example of such a budget and quickly manufactured gear:
That's it, the girder is ready for work.
Tip: wrap the end of the pipe near the suspension loop with red tape and then the disappearance of the girder will be visible from afar, and you will always have time to get to it in case of a bite.
There is one bait that crucian carp, especially not very large ones, prefer over all others. This is ordinary semolina porridge, but prepared in a special way.
Semolina bait recipe (hot):
This kind of porridge makes good balls for bait on a hook.
Semolina bait recipe (cold):
The bait is squeezed out of the syringe onto the hook and wrapped around it in a circle, the hook tip being closed last.
When feeder fishing, the feeder is a consumable item. It breaks while casting, it gets snagged and a new feeder is needed. In order not to constantly buy new ones, you can make them yourself from scrap materials.
Feeder made from a plastic bottle:
That's it, the feeder is ready, you can start fishing.
As you probably already understood yourself, there is nothing complicated in making additional homemade fishing devices and, for the most part, they do not require any specific skills or expensive machines for their production.
Therefore, do not be afraid of this, act boldly, invent little things yourself that can simplify the process of fishing or increase the catchability of the gear, and simply while away the long winter evenings.
When was the last time you caught dozens of HUGE pike/carp/bream?
We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.
A good catch can be achieved (and we know this) thanks to good bait.
It can be prepared at home or bought in fishing stores. But stores are expensive, and to prepare bait at home, you need to spend a lot of time, and, to be fair, homemade bait does not always work well.
You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?
So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?
It gives the same result that we cannot achieve on our own, especially since it is cheap, which distinguishes it from other means and there is no need to spend time on production - you order it, it’s delivered and you’re good to go!
Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!
Find out more about the bait!
For a professional fisherman, making fishing tackle with your own hands is an activity that brings the same pleasure as fishing. By creating new gear, feeders, baits and other devices, a fisherman can increase the fish catch several times. For making tackle at home, improvised means and tools are excellent.
Making fishing tackle is a fascinating activity.
If a fisherman makes fishing devices with his own hands, he must use the following materials and tools in his creativity:To make a fishing device with your own hands, it is enough to have available tools and materials.
Helicopter tackle is a popular winter tackle.
The helicopter structure consists of the following elements:Making fishing gear is very simple. Helicopter gear is made from tin. Thin tin cans are perfect.
The diameter of the pinwheel reaches five centimeters and it is attached to a leash, the length of which is one and a half meters, and the diameter is 0.22-0.25 millimeters.
Four short leashes of 15 centimeters each, 0.15-0.2 millimeters wide, are mounted to the long leash. Fastening can be done using a swivel. Place hooks on leashes. The leashes are attached at the same distance from each other.
The leashes are attached to the main line with a diameter of up to 0.45 millimeters with a locking ring. A flat weight weighing up to 80 grams is mounted on the fishing line.
Place a cambric up to four centimeters long and up to half a centimeter in diameter just above the load. The cambric fixes the fishing line on the whip, which notifies the fisherman about a bite.
Willow branches are placed under the whip, which can be collected on the river along the shore.
Before fishing with a helicopter, the fisherman must drill a hole in the direction of the current at an angle.
Having made a helicopter with his own hands, a fisherman will be able to fish constantly in winter and catch big fish.
To make a wobbler yourself, you should take wood from deciduous trees. The optimal length of oval wood is five centimeters.
We assemble the wobbler with our own hands:
By following the instructions for making a wobbler, you can get an excellent specimen, which will later be used to equip a fishing rod.
How to assemble a mandula? You can make a mandula from polyurethane foam. The material is obtained from various rugs and women's slippers. Mandula is great for pike perch fishing.
For the mandula you will need multi-colored polyurethane foam, double or triple hooks, wire 0.5-0.7 mm wide, a cotton swab, red wool, pliers, pliers, wire cutters, an awl, highly water-resistant glue, and a knife.
It is possible to make a mandula from polyurethane foam. With such equipment it is excellent to catch a predator.
Such baits are also called spoons. To make a spinner, you will need a cross-shaped hammer with balls at the end, a wooden board with a recess in the middle, a rubberized steel shaft, a metal ball, a drill, a hacksaw, and a steel stylus.
Stages of creating an oscillator petal:Manual vibrators are made of metal and wood. The simple design will allow you to catch excellent fish.
The spinner frame is made of stainless steel wire. Its length must be at least one hundred millimeters and its diameter 0.8 millimeters.
Manufacturing stages:You can increase the weight of the spinner by choosing a long wire, as well as using a sinker with a hole.
It is better to make a spinner out of wire. It is subsequently weighted with a sinker.
To make a castmaster you will need an empty metal pipe with a cross-section of sixteen millimeters and lead.
The tools you will need are a hacksaw, a drill, a drill up to three millimeters, a file, a vice, a caliper, and a soldering iron.
Let's assemble the castmaster ourselves:A castmaster is made from a small hollow tube. You should work with lead carefully, as it emits fumes that are harmful to health.
Such a balancer may be needed when fishing in winter. It looks like a voluminous bait that looks like a fish.
Manufacturing stages:
A balancer is a piece of equipment that looks like a fish and is used in winter. Homemade balancers guarantee a good catch.
Foam rubber is prepared in the form of fish from foam rubber sponges of different colors.
Manufacturing stages:To make your own accessories, you may also need a dishwashing sponge. It is used to make foam fish that can attract a large school of fish.
For jigs you will need lead or lead-tin alloys and gypsum. You should prepare the jig in the fresh air or wearing a mask, as lead is toxic.
Manufacturing stages:The jig is the simplest bait that is very easy to make yourself. It is necessary to prepare plaster and mold.
To create an electronic signaling device, you will need a bicycle spoke, an electronic and bite signaling device with a rod mount.
Manufacturing stages:You can also make bite alarms yourself. The basis is a bicycle spoke and a commercial signaling device.
To catch fish with a float rod, artificial baits are required that imitate crustaceans, worms, and maggots.
As bait, you can use wet and dry flies made from wool, feathers, cork, polystyrene foam, and colored threads.
To prepare fishing tackle at home, it is enough to use available materials: wooden blocks, polystyrene foam, wool, feathers, threads, and so on. Before making homemade products, you should understand what it will look like in the future and what kind of fish can be caught with it. Properly made tackle will help the angler catch a great catch.
Chub
Do it yourself
In this article we will talk about how you can make a fishing rod for winter trolling with your own hands. Someone will ask: “Why, since everything ready-made has been in stores for a long time?”, but since you came to this article, it means you need it and are interested. Not everyone is too lazy to make the tackle themselves; some people like it, while others, perhaps, simply don’t have it...
Perch
Do you want to learn how to make lures for pike and perch with your own hands? Well, some people like to buy beautiful lures in fishing stores, keep track of new products that have been released and add to their collections. Expensive purchased spoons, for the most part, have good catchability, and some of them are really very catchy. Here are examples of such spinners for perch and pike. But, k..
Winter fishing
Since you have come to this article on the site, it means that you have decided not to buy a fishing rod for winter fishing, but to make it yourself. Well, that's a good idea! Making tackle with your own hands is very exciting and, by the way, profitable! Someone doesn’t understand why make a winter fishing rod yourself if you can just go to a fishing store and choose one..
Winter fishing
Many fishermen who have sufficient fishing experience have become accustomed to making many fishing tackles and baits with their own hands. I highly recommend that a beginner start using homemade baits for several reasons. The main ones are: If you are a beginner, you do not know how the bait should work when catching a particular fish and you may make mistakes in manufacturing,..
white cupid
Who doesn't want to catch grass carp? Every fisherman dreams of having this handsome guy in his catch. Some succeed, and some are still unlucky with their catch. In this article I will tell you how to increase your chances of catching grass carp or catching your first trophy. To do this, we just need to prepare the right bait..
Do it yourself
Bombarda or sbirulino, as it is also called, has Italian roots. It is a weighted float that allows you to make long casts of light bait and fish almost any horizon of a reservoir. Bombards can be divided into 3 types: floating; neutral; drowning. The float of a floating bombard remains on the surface of the water after casting and does not sink. The float of the neutral bombard begins to slowly sink under..
Do it yourself
Bait for fishing is always necessary. If you fish without using fish bait, then know that you are losing most of the fish that you could catch. Store-bought bait is good, but expensive. But if you learn how to make bait for fishing with your own hands, you can easily make it at home. Such bait will cost you less...
crucian carp
Bait for crucian carp prepared by yourself is a great way to ensure yourself a good catch. Crucian carp is very fond of baited places. You've probably noticed how the lack of bite of this peaceful fish can easily be corrected by throwing a small amount of bait at the fishing point. So, crucian carp responds well to almost any bait, but there are options that are cheaper than store-bought ones and much...
Do it yourself
Pike fishing continues in winter; anglers are putting their spinning rods in the closet and picking up winter rods and lures. But this article concerns specifically fishing for pike with winter rods, or rather, about the bait itself - a spinner. What lures to use to catch pike in winter is the main topic of this article, and that’s what we’ll talk about. A fisherman's arsenal should always...
Do it yourself
Many fishermen catch or want to try to catch fish with this type of gear such as a girder. Zherlitsa is a very effective fishing tackle, fishing with which occurs passively, that is, without the direct participation of the fisherman. The design of this gear is elementary, so it’s very easy to make a vent yourself. In this article we will look at how to make a vent with your own hands. By the way, I would like to note that...
Do it yourself
A marker float is an indispensable thing when it is necessary to mark the fishing location when fishing with a feeder. By installing it at a specific point in the reservoir, you can no longer make mistakes when casting the tackle. Typically, marker floats indicate recesses, holes, or simply baited areas. After all, you will agree that if you throw the tackle exactly into the baited place, then the chances of a catch increase significantly. ..
Do it yourself
Many fishermen prefer homemade floats to purchased ones and want to learn how to make a float with their own hands, rather than buying them in a store. Floats can be made of any shape that you like and can also be painted in your favorite color, which will please your eye while fishing or which seems less noticeable to the eyes of the fish. This article will tell..
Do it yourself
Why is boilie better? Boilie is a modern bait that is used for catching carp fish species, mainly for carp and carp. Why is boilie a priority when there are many more affordable and natural baits? Because a boilie, unlike a worm, pearl barley or dough, is designed exclusively for large fish. The larger...
Why buy something you can make yourself? DIY fishing gear is a hobby for many fishermen. No, this does not mean at all that it is not possible to buy a float, feeder or other piece of equipment. Many fishermen have the money for the best gear, but still prefer to make some parts themselves. Some just out of interest, and some because they manage to make the most suitable option for themselves.
Regularly adding new articles will allow you to learn something new every time and try to do it yourself. You will learn how to make floats, spoons, jigs, marker floats and much more.
Related articles: | |
Fishing crafts and fishing tricks DIY fishing baits
For a professional fisherman to make fishing tackle with his own... Fishing crafts and fishing tricks DIY fishing crafts
Fishing has long ceased to be a simple entertainment and hobby for... Features of the geographical location of South Africa General characteristics of the economy of South Africa briefly
South African Republic population economy economy... |